Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   General information
   Forward brakes
   Back brakes
   Back disk brakes
   Main brake cylinder
   Pumping of brakes
   Brake amplifier
   Adjusting valve
   Hand brake
   Adjustment of brakes
   Anti-blocking system (ABS)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices



General information

Arrangement of brake pipelines on the car without ABS

1 — forward brakes
2 — back brakes
3 — the main brake cylinder
4 — a pressure regulator

Arrangement brake the pipeline on the car with ABS

1 — forward brakes
2 — back brakes
3 — the main brake cylinder
4 — the ABS device
5 — a pressure regulator

Arrangement of brake pipelines on the car with the carburetor engine

1 — forward brakes
2 — back brakes
3 — a pressure regulator (it is established in the cylinder)
4 — the main brake cylinder

On all models described in this management the double-circuit brake system with forward disk and back drum-type brakes if the carburetor engine is established, and all disk brakes if the injector engine is established is established. As certain models are equipped with ABS system, it is necessary to pay attention to connections of brake pipelines, at work at which pipelines are disconnected. Forward disk brakes are equipped with floating supports which are used on the majority of modern models. The floating support has only one piston, instead of two on supports of a former design. On models described in this edition disk brakes of two executions are established. All brakes have automatic adjustment. In system there is an adjusting valve for adjustment of brake pressure upon wheels. On the established drum-type brakes this valve is on inside of wheel brake cylinders, on disk brakes two separate valves (see illustrations) are established. The hand brake influences through a cable back wheels. In system the brake amplifier is established.