Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
- Coupling and power shafts
   + Coupling
   + Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices
canadian cialis



Coupling and power shafts

Specifications

General parameters

Separate characteristics are provided also in the text of Head and in case of obligation and their performance are allocated with a bold print

Coupling

Design One-disk dry coupling with a diafragmenny spring
Type:
  • engine of 1.6 l
L200К
  • engine of 2.0 l
L215К
Drive the hummock
Vyzhimna bearing ball-bearing with the sliding coupling

Conducted disk: 1.6 l 2.0 l
external diameter 200 mm 215 mm
internal diameter 134 mm 145 mm
thickness of a slip 3.5 mm with everyone a stor. 3.5 mm with everyone a stor.

minute depth from a slip to a rivet head 0.3 mm
Max. disk palpation 1.0 mm
Diafragmenny spring:
  • distance to a flywheel:
    • engine of 1.6 l
31 — 33 mm
    • engine of 2.0 l
30.5 — 32.5 mm
  • adjusting loading:
    • engine of 1.6 l
385 kg
    • engine of 2.0 l
500 kg
Coupling pedal:
  • pedal height
159.5 — 169.5 mm
  • люфт pedals
11 — 15 mm
  • люфт on the vyzhimny bearing
2.5 — 3.5 mm

Power shafts

Use of hinges of equal angular speeds:
  • 1.6 l, at the left and on the right
GI69 inside, 90АС outside
  • 2.0 Di and DE l, right shaft
89ST inside, 98АС outside
  • 2.0 Di and DE l, left shaft
GI 82 inside, 98АС outside
Demanded amount of greasing — 1.6 l 175 g (inside), 80 — 110 g (outside)
Demanded amount of greasing — 2.0 l, on the right 175 — 185 g (inside), 110 — 130 g (outside)
Demanded amount of greasing — 2.0 l, at the left 205 — 215 g (inside), 110 — 130 g (outside)
Length of cuffs (see an illustration):
  • 1.6 l
89 — 91 mm
  • 2.0 l
96 — 98 mm
Bearings of naves:
  • Max, axial люфт bearing
0.05 the mm or is less
  • Moment of an inhaling of a nut of a nave
240 — 320 N • m

Efforts of a tightening of carving connections

The moments of an inhaling of fixture are given in the text of Head and on some иллюстрациях*.

*vydelenny in the text a bold print the moments of an inhaling are subject to exact observance; the efforts not allocated with a bold print are given only roughly.

coupling on a flywheel 22-30 N • m

bolt of a countersupport of coupling

8-11 N • m

lock-nut of a persistent bolt of a pedal

16-22 N • m