Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
- System of electric equipment of the engine
   General information
   + ignition System
   + charge and start Systems
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices
hypertherm 105 hypertherm заметка: elitposuda.ru



System of electric equipment of the engine

Specifications

Separate characteristics are provided also in the text of Head and in case of obligation of their performance are allocated with a bold print

Ignition system

Design  works with the corresponding power supply system
Sequence of ignition 1 — 3 — 4 — 2
The ignition moment — the carburetor engine:
  • with the ignition distributor, first execution 
2±2 ° before VMT, a vacuum hose of the distributor pull together and stop up (without the catalyst) or a vacuum hose of the vacuum amplifier (with the catalyst)
  • with the ignition distributor, second execution 
10±5 ° before VMT, the vacuum hose remains is connected to the distributor (without the catalyst) or the vacuum hose is connected to the vacuum amplifier (with the catalyst)

Spark plugs

  • Used type:
    • carburetor engine (normal candles) 
Champion RC9YCC or NGK6EY
    • injector engine (normal candles) 
Champion RC9YCC or NGKBKR5EY
Distance between electrodes 0.8 — 0.9 mm
Size of a carving  М14
Length of a carving  19 mm
Size of a shestigrannik  16 mm
Ignition coil
  • Primary tension 
12В
  • Primary resistance at 20 ° With 
about 1.0 Ohm
  • Secondary resistance at 20 ° With 
about 10.0 kiloohms

Charge and start system

Battery
  • Tension 
12 In
  • Polarity 
negative weight
  • Capacity 
9 Ach or 65 Ach depending on execution
Generator Producer
  • 1.6 l 
Magnetti-Marelli, A127/67
  • 2.0 l 
Bosch KC14V 45-80 A
Adjusting switch it is established in the generator
Rated voltage  12 In
Rated power  67A/12B (1.6л), 80A/12B (2.0л)
Charging beginning  1200 rpm (1.6 l), 1000 rpm (2.0 l)
Given current:
  • 1.6 l 
more than 48 And at 2500 rpm
  • 2.0 l 
more than 80 And at 6000 rpm
Minimum length of brushes  more than 5.0 mm (1.6), 10 mm (2.0)
Force of a spring of a brush:
  • 1.6 l 
1.1 — 2.7 kg
  • 2.0 l 
1.9 kg
External diameter of contact rings:
  • 1.6 l 
25.40 mm
  • 2.0 l 
15.3 mm
Adjustable tension  13.6 — 14.6 In (1.6 l)
Starter Producer
  • 1.6 l 
Magnetti-Marelli, M79/1.0
  • 2.0 l 
Magnetti-Marelli, M78/1.4
Rated power  1.0 kW (1.6 l), 1.4 kW (2.0 l)
Tension  11.5 In
Current consumption  less than 75 And (1.6 l), 78А (2.0 l)
Number of turns  more than 6200 rpm (1.6 l), 3000 rpm (2.0 l)
External diameter of a collector  28.8 mm
Minimum length of brushes  3.5 mm (1.6 l), 5 mm (2.0 l)
Force of springs of brushes:
  • 1.6 l 
1.51 — 2.45 kg
  • 2.0 l 
1.46 — 2.57 kg

Efforts of a tightening of carving connections

The moments of an inhaling of fixture are given in the text of Head and on some иллюстрациях*.

*vydelenny in the text a bold print the moments of an inhaling are subject to exact observance; the efforts not allocated with a bold print are given only roughly.

Spark plugs

20 — 30 N • m