Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
- Current leaving and service
   + Schedule of routine maintenance
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices
caalis cnada создание сайтов королёв



Current leaving and service

Specifications

Types and volumes of applied greasings and liquids

Fuel tank 60 liters
Cooling system:
  • Engine of 1.6 l
6.4 l
  • The engine of 2.0 l with a manual transmission
6.5 l
  • The engine of 2.0 l with an automatic transmission
6.5 l
The case pallet — the engine of 1.6 l:
  • with replacement of the oil filter
3.2 l
  • without replacement of the oil filter
2.8 l
The case pallet — the engine of 2.0 l:
  • with replacement of the oil filter
3.4 l
  • without replacement of the oil filter
3.2 l
Manual transmission:
  • models with the engine of 1.6 l
2.9 l
  • models with the engine of 2.0 l
3.5 — 3.7 l
Automatic transmission 7.0 l, Dexron oil
Amplifier of a steering 0.9 l

Specifications

Sizes
  • Length
4400 mm
  • Width
1700 mm
  • Height
1395 mm
  • Wheel base
2550 mm
  • Width of a track, in front
1470 mm
  • Width of a track, behind
1460 mm
  • Minute height of a road gleam
144 mm

Carburetor engine of 1.6 l

Designation GA16DS
Arrangement and number of cylinders ryadny, 4 cylinders
Sequence of ignition 1 — 3 — 4 — 2
Head of cylinders from an aluminum alloy with the built-in chambers of combustion
Drive of the distributive mechanism two driving chains, the bottom chain from an asterisk and the crankshaft on the double intermediate asterisk, the second chain from an intermediate asterisk to asterisks of cam-shafts
Crankshaft shod shaft with five support
Piston rings two kompressionny rings, one maslosjemny
General data
  • Working volume
1597 cm3
  • Diameter of cylinders
76.0 mm
  • Piston stroke
88.0 mm
  • Extent of compression
9.8: 1
Maximum capacity:
  • without the catalyst
70 kW (95 h.p.) at 6000 rpm
  • with the catalyst
66 kW (90 h.p.) at 6000 rpm
Max. torque:
  • without the catalyst
134 N • m at 4000 rpm
  • with the catalyst
133 N • m at 4000 rpm
Pressure of oil:
  • idling
0.49 — 1.86 bar
  • at 3000 rpm
3.43 — 4.41
Idling 750 ± 200 rpm
Pressure of a compression at 350 rpm 13.7 bar
Minute pressure of a compression 11.8 bar
Admissible difference between cylinders 1 bar

Injector engines of 2.0 l

Designation SR20DE or SR20Di
Arrangement and number of cylinders ryadny, 4 cylinders
Sequence of ignition 1 — 3 — 4 — 2
Head of cylinders from an aluminum alloy with the built-in chambers of combustion
Drive of the distributive mechanism x from an aluminum alloy with the built-in chambers of combustion
Crankshaft shod shaft with five support
Piston rings two kompressionny rings, one maslosjemny ring
General data
  • Working volume
1989 cm3
  • Diameter of cylinders
86.0 mm
  • Piston stroke
86.0 mm
Extent of compression
  • SR20DE engine
10.0:1
  • SR20Di engine
9.5:1
Maximum capacity:
  • SR20DE engine
85 kW (116 h.p.) at 6000 rpm
  • SR20Di engine
110 kW (150 h.p.) at 6000 rpm
Max. torque:
  • SR20DE engine
166 N • m at 4000 rpm
  • SR20Di engine
181 N • m at 4000 rpm
Pressure of oil:
  • idling
more than 0.78 bar
  • at 3000 rpm — the SR20DE engine
4.0 bar
  • at 3000 rpm — the SR20Di engine
4.5 bar
Idling 850±50 rpm
Pressure of a compression at 350 rpm:
  • SR20DE engine
12.75 bar
  • SR20Di engine
12.26 bar
Minute pressure of a compression — the SR20DE engine 10.8 bar
  • SR20Di engine
10.3 bar
Admissible difference between cylinders 1 bar

Boundary values of a tension of driving belts:

The injector engine (see an illustration)
  • The generator, without the conditioner
13.0 mm
  • The generator, with the conditioner
12.5 mm
  • Pump of the steering amplifier / water pump
7.0 mm
The carburetor engine (see an illustration)
  • Generator (servoupravleniye)
11.0 mm
  • The generator (without a servoupravleniye)
10.0 mm
  • Pump of the steering amplifier
7.5 mm

New belt

The injector engine (see an illustration)
  • The generator, without the conditioner
7.0-8.0 mm
  • The generator, with the conditioner
6.5 — 7.5 mm
  • Pump of the steering amplifier / water pump
3.5 — 4.5 mm
The carburetor engine (see an illustration)
  • Generator (servoupravleniye)
6.0 — 8.0 mm
  • The generator (without a servoupravleniye)
6.0 — 8.0 mm
  • Pump of the steering amplifier
3.0-5.0 mm

Through 500 km

The injector engine (see an illustration)
  • The generator, without the conditioner
8.0 — 9.0 mm
  • The generator, with the conditioner
7.5 — 8.0 mm
  • Pump of the steering amplifier / water pump
4.0 — 5.05 mm
The carburetor engine (see an illustration)
  • Generator (servoupravleniye)
7.0 — 9.0 mm
  • The generator (without a servoupravleniye)
7.0 — 9.0 mm
  • Pump of the steering amplifier
4.0 — 6.0 mm

Data for idling adjustments

Carburetor engine
  • fast idling
2300±200 rpm
  • number of turns of idling
750±200 rpm
Cодержание WITH
  • without the catalyst
1.5 %±0.5 %
  • with the catalyst
1.0 %±0.5 %
The engine with SR20DE injection Idling (is not regulated)
  • with the switched-off conditioner
850±50 rpm
  • with the switched-on conditioner
850±50 rpm
The engine with SR20Di injection Idling (is not regulated)
  • without the conditioner
850±50 rpm
  • with the switched-on conditioner
850±50 rpm

Battery

Tension 12 In
Polarity negative weight
Capacity 59 Ach or 65 Ach

Spark plugs

Used type:
  • carburetor engine (normal candles)
Champion RC9TCC or NGK6EY
  • injector engine (normal candles)
Champion RC9TCC or NGKBKR5EY
Distance between electrodes 0.8 — 0.9 mm
Size of a carving М14
Length of a carving 19 mm
Size of a shestigrannik 16 mm

Ignition coil

Primary tension 12В
Primary resistance at 20 ° With about 1.0 Ohm
Secondary resistance at 20 ° With about 10.0 kiloohms

Corners of installation of back wheels

Disorder of back wheels from-1 ° 45' to-0°15'
Convergence of back wheels from-2 to + 2 mm

Corners of installation of forward wheels:

Convergence From 0 to 2.0 mm a positive convergence
Disorder from-45' to +0 ° 45' it is not regulated
Выбег from 1 ° to 2°30' it is not regulated
cross-section inclination of an axis of turn of a wheel from 13°45' to 15°15' it is not regulated
Wheel angle of rotation:
  • internal wheel of turn
35 — 39 ° (1.6 l), 33 — 37 ° (2 l)
  • external wheel of turn
29 — 33 ° (1.6 l), 28 — 32 ° (2 l)

Forward disk brakes

Minimum thickness of an overlay of a brake shoe

2.0 mm

Back drum-type brakes

Minimum thickness of an overlay of a brake shoe

1.5 mm

Back disk brakes

Minimum thickness of an overlay of a brake shoe

2.0 mm

Efforts of a tightening of carving connections

The moments of an inhaling of fixture are given in the text of Head and on some иллюстрациях*.

*vydelenny in the text a bold print the moments of an inhaling are subject to exact observance; the efforts not allocated with a bold print are given only roughly.

masloslivny stopper 30 — 40 N • m
drain stopper of the block of cylinders 8 — 12 N • m
spark plugs 20 — 30 N • m
nut of a forward nave 235 — 314 N • m
nut of a back nave 186 — 255 N • m
nuts of wheels 90 — 120 N • m